About Pigmented Inks
From fast drying acetone-based marking fluids to high-flash, slow-drying pigmented marking fluids, we have a variety of pigmented solvent based inks to suit your needs.
Applications
Pigmented inks are heavily bodied and show up well on both dark and light colored surfaces. These inks also exhibit a greater chemical and wash resistance than dye-type inks. Marking fluids of this nature are available in a rainbow of colors and various dry times. Allow us to show you how pigmented marking fluids can integrate well with camera vision systems.
Please note that these are representative colors. The final appearance on your part will vary with formula, application method, and substrate.
| XX-1346 | A super fast drying acetone based pigmented marking fluid primarily used in Carco non-contact marking systems. Used for marking dark or black substrates and often used in combination with eddy current, NDT and Ultrasonic equipment when one wishes to visibly identify defects on very fast moving webs, tubing or parts. Dry time on part +/- 10 seconds. |
| MM-150 | A fast dry pigmented marking fluid with fair alkaline wash resistance and excellent oil penetration and adhesion on all porous and non-porous surfaces. The penetration power of the MM-150 series marking fluid is useful where oil and/or coolants are prevalent. Generally used in Carco "ES-1157-C Jet Shot" and ES-800 Spray System applications. Dry time on is anywhere from 25 seconds to 1 minute depending on the application and material being marked upon. |
| F-123 | A medium fast dry, heavily pigmented marking fluid. Recommended for open pad / hand stamping and often used with the Carco ES-712-A Spring Marker. Dry time on part about 2-3 minutes. |
| SG-1260 | The SG-1260 is medium fast dry heavily pigmented marking fluid formulated for caustic chemical resistance; including alkaline, acid and phosphate baths. Used in a variety of Carco marking equipment. Dry time on part about 2-3 minutes. |
| F-264 | A medium slow dry heavily pigmented marking fluid. Developed for use in Carco Spring/Contact marking systems. Dry time on part about 5-9 minutes. |
| F-224 | A high flash, slow dry pigmented marking fluid often used where flammability and safety are primary considerations. The F-224 series is used with all Carco Spring/Contact marking systems. Dry time on part being marked about 15+ minutes. |
| SG-1290 | The SG-1290 is slow dry heavily pigmented marking fluid formulated for caustic chemical resistance; including alkaline, acid and phosphate baths. The SG-1290 series is primarily used with Carco Spring/Contact marking systems. Dry time on part being marked about 15+ minutes. |